Top 10 Function Generator Kits

Do you require Function Generator Kits? Is it becoming difficult for you to get an Function Generator Kits that fits your requirements? Well, you are not the only one.

The best Function Generator Kits products that you can select.


Well, here is a list of the top 10 Function Generator Kits with all the details. Read about all of them and then decide which one is your product:

Best Function Generator Kits Detailed Features :

Signal Generator Kit, XR2206 Precise Function Signal Generator Frequency Module Signal Generator DIY Kit Sine Triangle Square Output Adjustable 1Hz-1MHz, 9-12V DC Input (1)

$8.99  in stock
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • Good precision: the XR2206 function signal generator is precise, with a transparent case box shell for good assemble; Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHz
  • Parameters: Voltage Supply: 9-12V DC Input; Waveforms: Square, Sine, Triangle; Impedance: 600 Ohm + 10%; Frequency: 1Hz-1MHz; Amplitude: 0-3V at 9V DC; InputDistortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kaHz
  • Sine wave parameters:Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHz
  • Square wave parameters: Amplitude: 8V (no load) at 9V DC Input; Rise Time: less than 50ns (at 1KHz); Fall Time: less than 30ns (at 1KHz); Symmetry: less than 5% (at 1KHz)
  • Triangle wave: Amplitude: 0-3V at 9V DC input; Linearity: less than 1% (up to 100 KHz) 10 mA

Ferwooh Precise Function Signal Generator Kit XR2206 Frequency Module Sine Triangle Square Output Adjustable 1Hz-1MHz DC 9-12V

$12.99  in stock
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • 【Specifications】Voltage Supply: 9-12V DC Input; Wave forms: Square, Sine, Triangle; Impedance: 600 Ohm + 10%; Frequency: 1Hz-1MHz; Amplitude: 0-3V at 9V DC; Input Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kaHz
  • 【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer.
  • 【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time.
  • 【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity; Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V.
  • 【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation.

Onyehn XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency Amplitude + Transparent Case Box Shell

$10.99  in stock
2 new from $10.99
Free shipping
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • High Precision, can generate sine/triangle/square waveforms.
  • Output frequency range: 1Hz-1MHz and Adjustable frequency and amplitude.
  • Wide power supply range, use 9-12V external power or 9V battery(NOT Included).
  • This is a DIY kit with All are through hole components,easily assemble the Function Generator by yourself.
  • Onyehn XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency Amplitude + Transparent Case Box Shell

Function Generator DIY KIT by JYE Tech FG085

$53.99  in stock
3 new from $53.99
Free shipping
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • Generating continuous waveforms of Sine, Square, Triangle, Ramp (up and down), and Staircase (up and down)
  • Generating user defined arbitrary waveforms (AWG)
  • Generating frequency sweeping signals of selected waveforms. Start frequency, stop frequency, and sweep rate can be independently set
  • Generating servo test/control signals in micro-second resolution with user programmable pulse width, amplitude, and cycle
  • Frequency (period), amplitude, and offset can be incrementally adjusted with rotary encoder

ICQUANZX XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency Amplitude

$10.39
$9.39
 in stock
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • High resolution, can generate sine/triangle/square waveforms.
  • Frequency range: 1Hz-1MHz.
  • Adjustable frequency and amplitude.
  • Frequency adjustment features coarse tuning and fine tuning.
  • Wide power supply range, use 9-12V external power or 9V battery(NOT Included).

HiLetgo 2pcs ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle

$9.99  in stock
1 used from $8.31
Free shipping
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • ICL8038 Monolithic Function Signal Generator Module DIY Kit
  • Frequency range: 50-5KHz,
  • Input: 12V DC
  • Model: ICL8038
  • uniform voltage is + VCC / 2

DollaTek ICL8038 High Precision Signal Generator DIY Kit Sine Triangle Square Sawtooth Output 5Hz~400kHz Adjustable Frequency Amplitude

$12.99  in stock
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • Uses ICL8038 and high-speed op amp, higher accuracy.
  • Can output sine/triangle/square/forward and reverse sawtooth waveforms.
  • Frequency Range: 5Hz~400kHz; Duty Cycle Range: 2~95%(Adjustable)
  • Supports dual power amplifier without blocking the capacitor to ensure high and low frequency signal distortion.
  • Frequency adjustment features coarse tuning and fine tuning.

Ximimark 1Set ICL8038 Monolithic Function Waveform Signal Generator Module DIY Kit Electronic Training Spare Part Sine Square Triangle Wave Output 50Hz-7KHz Adjustable Frequency

$7.59  in stock
2 new from $4.99
Free shipping
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • With excellent performance ASIC chip function generator ICL8038, add a small amount of resistive and capacitive components, can produce sine, triangle and square wave, and the frequency of the signal, duty cycle, adjustable distortion sine wave.
  • Some signal generator parts only have a potentiometer to adjust the frequency. If you want to accurately obtain a certain frequency, it is not easy to adjust. This kit adds a potentiometer for frequency trimming, which makes it easy to get accurate frequencies.
  • Requires a certain DIY ability, you need to weld the kit yourself.
  • Frequency range: 50Hz--7KHz.
  • Duty cycle: 27% - 63% (square wave).

1MHz Function Generator Kit

$36.99  in stock
3 new from $36.99
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • Provides sine, square or saw tooth waveforms continuously variable 1Hz to 1MHz
  • Amplitude adjustable to 3V peak-to peak
  • Complete w/ all parts, parts, PC board, schematic and deluxe case w/ handle
  • Extensive assembly manual; available assembled model FG-500
  • Made In US

ELENCO FG-500K 1Hz-1MHz Function Generator Kit w/Training Course

$44.97  in stock
2 new from $44.97
Amazon.com
as of July 2, 2022 6:25 pm

Features

  • THIS IS A SOLDER VERSION KIT (requires previous soldering experience)
  • The frequency of this generator can be continuously varied from 1Hz to 1MHz in 6 steps
  • Complete w/ All Parts, PC Board, Schematic and NEW Deluxe Case
  • Provides Sine, Square or Saw Tooth Waveforms.....Amplitude Adjustable to 3V Peak to Peak
  • Extensive Assembly Manual/Do it yourself kit form makes a great project

FAQ

Where to find 10 Best Function Generator Kits?

JCCA has broadly reviewed major Function Generator Kits to provide the best options.

Is the Function Generator Kits Reliable?

Yes, JCCA has tested all the products of Function Generator Kits through Several Medium to provide the best option.

Spread the love

Leave a Comment